Engineering   |   General   |   Hardware   |   Machinery   |   Routing   |   Woodworking
Home  >>   News   >>   About Us   >>   Freight   >>   Contact Us  >>   Shopping Cart
OFF-CENTRE CHUCK SET

Category Browser
OFF-CENTRE CHUCK SET
Off-Centre Chuck is threaded onto the lathe head spindle and then a scroll chuck is threaded to it (face).The material your are turning is mounted onto the screw chuck.The amount of degrees off centre you cut is determined by the number of turns applied to the cross screw.
TURNING A THREE-SIDE WORKPIECE place a piece of masking tape around the circumference of the jaw on scroll chuck Mark the tape at  0 and measure the circumference and divide by the number of sides you are creating, TURNING A PEN BLANK  To turn a pen on mandrel , it round on a mandrel and shape the ends to size before off centre turning the sides. The mandrel with appropriate bushings, Lock in place. TURNING A BOTTLE STOPPER  Drill the appropriate hole for 3/8" thread for mounting your blank . Screw and tighten on Stopper Mandrel. USING THE MULTI-PORT HOLDER It can be used with the either pen mandrel or the Stopper Mandrel , Screw the mandrel into one of the four holes, Screw the balance bolt with nut into the opposite hole.Use the centre hole to go back on centre without using the balance bolt and nut.  ( A5 )
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
CSC6019 Off-Centre Chuck, 3/4"x16tpi 3200 $120.00 Yes
CSC6008 Off-Centre Chuck, 1"x8tpi 3200 $120.00 Yes
CSC6010 Off-Centre Chuck, 1"x10tpi 3200 $120.00 Yes
454 HUME HWY. YAGOONA 2199 NSW TEL:(02)9709 8805 FAX:(02)9709 8831