Engineering   |   General   |   Hardware   |   Machinery   |   Routing   |   Woodworking
Home  >>   News   >>   About Us   >>   Freight   >>   Contact Us  >>   Shopping Cart
VICE / PICTURE FRAMING / BENCH DOG
SHOULDER VICE SCREW
TAIL VICE SCREW
WOODEN VICE HANDLE
BENCH DOG
END VICE
FRONT VICE
MITRE SLED / CAM-LOCK HOLDFAST
QUICK RELEASE FRONT VICE
QUICK RELEASE WOODWORKING VICE
T-BAR CLAMP / RAIL-BAR SASH CLAMP
ADJUSTABLE ANGLE VICE
BENCH DOG & WONDER
DRILL PRESS VICES
FIX BASE TABLE VICE
HANDY FRAME VICE
LOW PROFILE BENCH DOG
MAT CUTTER
MITRE TRIMMER
MITRE VICE (2)
MULTI ANGLE CORNER CLAMP
PANEL CLAMP KIT
PICTURE FRAME MITRE CLAMP
PINCH DOGS
PROFESSIONAL MITRE VICE
PUSH FRAME DEVICE
QUICK RELEASE DRILL PRESS VICE
RAPID ACTION BAND CLAMP
RIGHT ANGLE & FACE FRAME VICE
RUBBER BAND CLAMPING SET
SELF-SQUARING FRAME CLAMP
SPRING MITRE CLAMP SET
SURGICAL TUBING CLAMPING SET
SWIVEL BASE TABLE VICE
VICE CLAMP
WELDING MITRE VICE
WELDING MITRE VICE

Category Browser
SHOULDER VICE SCREW

Shoulder vice screw is specifically for the type of 'L' shaped shoulder vice used on Scandinavian style benches. It has a 1" diameter screw with single lead Acme threads. The threaded guide is mortised into the vise shoulder while the end guide attaches to the vice jaw.     

SVS-300:  1" diameter screw, 300mm capacity, 400mm overall.                           

ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
SVS-300 1"(25.4mm) Acme thread x 300mm 3000 $32.00 Yes
TAIL VICE SCREW

Tail vice screw same construction as a shoulder vice screw but without an end guide.  

TVS-13:  1" diameter screw, 300mm capacity, 450mm overall.                              

TVS-16:  1-1/4" diameter screw, 430mm capacity,  580mm overall.

ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
TVS-13 1" Dia. x 13" Long 3200 $35.00 Yes
TVS-16 1-1/4" Dia. x 17" Long 4200 $48.00 Yes
WOODEN VICE HANDLE
Wooden Vice Handle with End Caps.
23mm Suit the Vice with 1" Dia. Screw,  
27mm Suit the Vice with 1-1/4" Dia. Screw.
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
WVH23350 23.2 x 480mm, Suit 1" Screw vice 180 $12.00 Yes
WVH27400 27 x 480mm, Suit 1-1/4" Screw vice 220 $13.00 Yes
BENCH DOG

ABD-12R   For 3/4" hole. Block face: 1-1/4"x 11/16"

ABD-12S  For 3/4"x 5/8" hole. 6-3/4" long, Brass face: 1" x 5/8".

ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
ABD-12R 3/4" Round x 4-1/2" Long 800 $30.00 Yes
ABD-12S 3/4"x 5/8" Square x 6-3/4" long 1000 $30.00 Yes
END VICE
Building a cabinet maker's custom workbench vise. Handle and bolts not included. 

EV15-4:   15" length x 4" width. 1" diameter screw, 300mm capacity. 

EV17-4:   17" length x 4" width. 1-1/4" diameter screw, 430mm capacity.
 
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
EV15-4 100x380mm, 1" Screw, 300mm capacity 4500 $60.00 Yes
EV17-4 100x430mm, 1-1/4" Screw, 430mm capacity. 8000 $80.00 Yes
FRONT VICE
Building a cabinet maker's custom workbench vise. Handle and bolts not included. 

FV14-714" length x 7" width. 1" diameter x 12" length screw.

FV18-10: 18" length x 10" width.  1-1/4" diameter x 14" length screw. 

 
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
FV14-7 220x360mm, 1" Screw, 300mm capacity 4800 $65.00 Yes
FV18-10 250x480mm, 1-1/4" Screw, 430mm capacity 8500 $90.00 Yes
MITRE SLED / CAM-LOCK HOLDFAST
(SSJ1)  This is the M10 wing nut locking under safty sled.  Quick release hold downs lock your material firmly to the oversize metal base. Built in miter gauge easily sets for all common angles.This is the perfect sled for the serious router enthusiast or shaper owner.
(UPC1)  Position a hold down anywhere you can supply a 3/4" hole. The wedge mount allows you to tighten the hold fast into the mounting hole when the thickness of the mounting surface is 1" and thicker. For thin surfaces, remove the wedge mounts and tighten into position with the ring nut. Either mounting method provides a secure mount to hold any material in place. Maximum capacity is 4-1/2".
  ( 9 )
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
SSJ1 (Green) M10 wing nut locking 900 $35.00 Yes
UPC1 (Black) Cam-Lock 3/4" hole down 900 $35.00 Yes
QUICK RELEASE FRONT VICE
Features a machined pivoting nut that engages or releases with a turn of the 1-1/4" dia. screw.  Handle and bolts not included. 

QRFV19-11: 19" length x 11" width.  1-1/4" diameter x 14" length screw. 

ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
QRFV19-11 260x500mm, 1-1/4" Screw, 430mm capacity 9000 $95.00 Yes
QUICK RELEASE WOODWORKING VICE
Tradition woodworking vice with a quick mechanism.Press the trigger initiates the quick release action, allowing the front jaw to slide freely.This allows you to interchange small and large workpieces quick and smooth.The built-in dog may be used in combination with a bench dog to offer alternate uses. QRWV-7    15" length x 7" width. 1" diameter x 13" length screw. Jaw opening: 250mm. QRWV-9   15" length x  9"width. 1" diameter x 13" length screw. Jaw opening: 300mm.     ( B3 )
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
QRWV-7 7" width ( 10" opening ) 8500 $75.00 Yes
QRWV-9 9" width ( 12" opening ) 16000 $95.00 Yes
T-BAR CLAMP / RAIL-BAR SASH CLAMP

T-BAR SASH CLAMP:  Special cold drawn steel (25mmx5mm) which offers great resilience to bending. Malleable iron head and slide allow these cramps to be used for extra heavy duty applications. The cramp can be permanently fixed to the workbench. The main screw has rolled Acme thread for smooth movement and is blackened for increased resistance to corrosion. The sliding jaw is fastened to the T-bar by inserting a steel pin.
RAIL-BAR SASH CLAMP:  Special cold drawn steel (35mmx60mm) which offers great resilience to bending. Malleable iron head and slide allow these cramps to be used for extra heavy duty applications. The cramp can be permanently fixed to the workbench. The main screw has rolled Acme thread for smooth movement and is blackened for increased resistance to corrosion. The sliding jaw is fastened to the T-bar by inserting a steel pin.70x90mm clamp face.

ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
TSC1200 T-BAR SASH CLAMP, OPENING 1050MM, OVERALL 1250MM 5000 $49.00 No
TSC1500 T-BAR SASH CLAMP, OPENING 1350MM, OVERALL 1550MM 6500 $60.00 Yes
RSC1500 RAIL-BAR SASH CLAMP, OPENING 1300MM, OVERALL 1560MM 10000 $76.00 Yes
RSC2000 RAIL-BAR SASH CLAMP, OPENING 1800MM, OVERALL 2060MM 12500 $89.00 Yes
ADJUSTABLE ANGLE VICE
This handy drill press vice features smooth operation and accurate adjustment to any angle from 0 degree to 90 degree. Adjustable hardened and ground replaceable jaws to fit round parts. jaw depth 1-1/2",  Perfect for those difficult drill press applications. Jaw opening measures 3".
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
428-7102 3-1/2" 4700 $80.00 Yes
BENCH DOG & WONDER
Provide a stop to secure the workpiece from moving or sliding when drilling, cutting, gluing, or hand planning. Fits all 3/4" hole workbenchs.



ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
BDB219R 2pc/set Dog,110 x 30mm depth,3/4" Round (Brass) 400 $30.00 Yes
BDWB219 2pc/set Dog & Wonder, 65 x 19mm depth, 3/4" (Brass jaw) 600 $30.00 Yes
BDB119R Dog 62 x 20mm depth,3/4" Round (Brass) 600 $10.00 Yes
DRILL PRESS VICES
  ( B1 )
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
DPV-2.5 2-1/2"(63mm) 1300 $26.00 Yes
DPV-3 3" (75mm) 1800 $32.00 Yes
DPV-4 4" (100mm) 2500 $38.00 Yes
DPV-5 5" (125mm) 3000 $45.00 Yes
FIX BASE TABLE VICE
Alloy fix base table vice.

Jaw width x Reach x Opening 
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
JH022 60 x 30 x 40mm, Aluminium Body 450 $15.00 Yes
JH021 80 x 40 x 65mm, Aluminium Body 1100 $25.00 No
HANDY FRAME VICE
The Handy Clamp is your third, fourth, and fifth helping hand at assembly time. Put an end to juggling heavy boards and awkward clamps.  Simply snap the Handy Clamp onto the connection area to hold boards in position.  Conveniently frees-up your hands to adjust the boards and operate clamps.  The handy clamp holds boards up to 3/4" thick at an accurate 90º angle.  Stainless steel spring jaws and reinforced plastic construction resist rusting and will not adhere to the work project.
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
HCP1 2pc/set 380 $25.00 Yes
LOW PROFILE BENCH DOG
For 3/4" hole. With low profile (1-7/16'') for working with 1/2'' + thick material.
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
PBD1 4pc/set, Plastic 50 $10.00 Yes
MAT CUTTER
One of the challenges of cutting mat materials is creating a uniform bevelled edge. especially where corners meet. There has always been potential for tear out at corners until now. The unique swing action of this mat cutter slices the material at a complementing angle to the bevel of the blade leaving clean, tear-free corners every time.  ( A1 )
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
MC45 65x100mm 200 $65.00 Yes
MITRE TRIMMER
Makes perfect miters of up to 4" and 6" when squaring. Both right and left cuts can be made at angles between 45° and 90°. Ground base surface and two razor sharp knives offer controlled shaving and leave a glass smooth finish on stock.                                                 
MTC   Miter Trimmer                                                                 
MTM   Measuring Attachment - For trimming duplicate sizes, repeat cuts up to 28-1/2". Easily set up with trimmer base.                
MTMB  For compound cuts: Top Trim Attachment

ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
A15E55 (MTC) Miter Trimmer, Up to 4" and 6", 45° and 90° 12000 $285.00 Yes
A126867 (MTM) Measuring Attachment 800 $48.00 Yes
A126966 (MTMB) Top Trim Attachment for compound cut 1800 $65.00 Yes
MITRE VICE (2)
Cast Aluminium
Jaw width 
Jaw depth  x  Jaw opening
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
JH029 80 x 15 x 75mm 300 $10.00 Yes
JH026 75 x 30 x 65mm,Quick released 1000 $35.00 Yes
MULTI ANGLE CORNER CLAMP
Professional picture frame clamp,Band with 11mmx 4M spring steel strap. Capacity: 67x67mm to 915x915mm Corner pieces  with machined pivot hole,  Heavy duty alloy with plastic multi-angle inserts. The flexible jaw inserts are non-marring and are easily removed. They’re made of high impact ABS plastic for long life and heavy use. The dual pivot feature allows the Merle to clamp virtually any size or shape securely! Perfect for circles and ovals plus polygonal shapes.
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
TV148 67x67 to 915x915mm SQ. 2200 $48.00 Yes
PANEL CLAMP KIT

For joint 20~40mm thick board ,Need two sets a clamping unit , Cut 50 x 50mm wooden beams by length with 3/4" through holes around bar, Locking nuts holding two panels.  ( 8 )

DPCK2840 (Yellow)  2pc/set, stop-screw clamp, two side cross (28 or 40mm thikness)


ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
DPCK140M18 2pc/set, stop-screw clamp, 140mm two side with M18 thread & nuts 1100 $30.00 No
DPCK2840 2pc/set, stop-screw clamp, two side (28 or 40mm ) thikness 900 $15.00 Yes
PICTURE FRAME MITRE CLAMP
Easily clamps all styles of picture frames up to 48" x 48". Plated rods are fully threaded and thumb nuts make accurate adjustments of the corners quick and easy. Also clamps small boxes and furniture.
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
JJX96 48" x 48" 1200 $30.00 Yes
PINCH DOGS
These simple steel clamps, keep boards tightly together for gluing panels, tables, bench tops and others when driven into end grain along a joint.
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
PDS2 1-1/2" 10pcs/pack 300 $28.00 Yes
PDS3 2" 10pcs/pack 350 $32.00 Yes
PROFESSIONAL MITRE VICE
Clamps boards and molding up to 4" wide for nailing or gluing. Rotates 90° and locks at any position between 0 degree horizontal and 90 degree vertical. Features a saw slot at the apex of the 45° angle for final trimming of a joint. Inside jaws and vice table are cast iron with steel vice screws and knurled aluminium cylinder handles. Jaw width 78mm and jaw height 7mm.
Similar to the above, but in addition to holding joints at 90 degree, this vice can be adjusted to hole moldings at any angle you choose. Detentes at 0°, 15°, 30°, and 45° make adjustments to these common angles quick and easy. Jaw width 78mm and jaw height 7mm.
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
CAC-4 4", 90° Mitre 5000 $80.00 Yes
128746 4" Adjustable Angle 5100 $140.00 Yes
PUSH FRAME DEVICE
V-nails capture and pull miter joints together cleanly and efficiently. This dual purpose driver installs V-nails by hammer force or by removing the plastic handle, chucks in a drill press for pressing with the drill press handle. (always disconnect power to the drill press for this method)  V-nails are not included.
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
PFD01 100mm 150 $15.00 Yes
QUICK RELEASE DRILL PRESS VICE
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
JH024 60 x 30 x 70mm, quick release 600 $28.00 Yes
JH025-1 100 x 40 x 90mm, quick release with table clamp 2300 $38.00 Yes
RAPID ACTION BAND CLAMP
The ratchet action mechanism needs no tool for operation, tightening the clamping band easily and releasing it at the touch of a lever. The1" wide nylon web band exerts a steady 1500lbs of pressure on the workpiece.
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
111210 25' 200 $15.00 Yes
RIGHT ANGLE & FACE FRAME VICE
Grips up to 7/8" stock, Large wing-type handle Strong, lightweight design



ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
JH032 Right Angle, 80 x 80 x 280mm 900 $26.00 Yes
JH033 Face Frame, 80 x 80 x 330mm 1100 $29.00 Yes
RUBBER BAND CLAMPING SET
A perfect solution for quick cheap clamping devices. Simply wrap bands over small workpiece needing gluing or fixing. These bands apply equal pressure all round. Great for small clamping jobs and piece with odd shapes. 2 x 14", 2 x 12", 4 x 9", 4 x 7" with 3/4" wide.
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
127950 12pcs/set 50 $10.00 Yes
SELF-SQUARING FRAME CLAMP
For use while gluing or nailing self-squaring, exerting equal pressure on all joints. Clamp's dimensions range from 5x7" to 26x30". For oversized projects, apply a bar clamp instead of the carriage bolt. Extruded aluminium rack, plastic jaws.
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
C-SSF 26" X 30" 1200 $35.00 Yes
SPRING MITRE CLAMP SET
Quick and easy to apply and made of tempered spring steel, these sharp ended clamps hold by pulling the pointed end parts. Set includes one spreader and 10 clamps from each of the 6 sizes listed-a total of 48 clamps. A. 13~20mm(1/2"~3/4")
B. 17~25mm(11/16"~1")
C. 22~30mm(7/8"~1-3/16")
D. 25~40mm(1"~1-5/8")
E. 45~60mm(1-3/4"~2-3/8")
F. 65~80mm(2-1/2"~3-3/8")
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
PC-648 300mm 2000 $99.00 Yes
SURGICAL TUBING CLAMPING SET
To clamp odd shapes with absolutely no marring, it is hard to beat natural rubber tubing. Overwrap one end to start and tuck the other end in when you are finished; it couldn't be easier to use. As you clamp, you can get increased pressure with each additional wrap.
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
SPQ1 1/4" X 20' 100 $15.00 Yes
SWIVEL BASE TABLE VICE
Heavy duty cast steel swivel base table vice with anvil

Jaw Width x Reach x Opening 
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
TV-B40 40 x 20 x 30mm with swivel, Cast steel 1500 $25.00 No
TV-Z50 50 x 25 x 40mm with swivel, Cast steel 2700 $35.00 Yes
VICE CLAMP
Strong, fast acting clamps easily attach to drill press or other shop fixtures. 
VC-6     6" clamp, 1-7/8"throat
VC-9     9" clamp, 3-1/2"throat
VC-11  
11" clamp, 4" throat

ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
85G08 6" 600 $24.00 Yes
85G09 9" 900 $30.00 Yes
85G11 11" 1500 $38.00 Yes
WELDING MITRE VICE
Jaw height  40mm , Has "V" jaw for holding round material. Great for welding framing, Clamps on both sides. Sets up easily and the time saver  ( B2 )
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
318-0008 2-1/2" heavy duty 2000 $75.00 Yes
WELDING MITRE VICE
Great for framing, drilling, doweling, and much more. Clamps on both sides. Sets up instantly- Ready to go to work for you ( B2 )


Jaw width  x 
Jaw depth  x  Jaw opening
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
JH028 95 x 35 x 65mm, Cast Aluminium 1000 $29.00 Yes
AC-60 115 x 40 x 60mm, Cast Iren ( heavy duty) 6000 $85.00 Yes
AC-100 125 x 60 x 100mm, Cast Iren ( heavy duty ) 13000 $135.00 Yes
454 HUME HWY. YAGOONA 2199 NSW TEL:(02)9709 8805 FAX:(02)9709 8831