Engineering   |   General   |   Hardware   |   Machinery   |   Routing   |   Woodworking
Home  >>   News   >>   About Us   >>   Freight   >>   Contact Us  >>   Shopping Cart
T-TRACK / MITRE TRACK / FIXTURE
T-TRACK
T-TRACK HOLD DOWN CLAMP
UNIVERSAL FENCE CLAMP
CAM ACTION HOLD DOWN CLAMP
FLIP STOP
FLIP STOP for T-TRACK
JIG & FIXTURE SET
MINI T-TRACK
MITER T FANCE
MITRE GAUGE
MITRE GAUGE
MITRE TRACK
MITRE TRACK FIXTURE KIT
SLICK PLATE
SLIDE CAM CLAMP
SQUARE NUT
T-BOLT / HEX. HEAD BOLT
T-TRACK CLAMP
T-TRACK CLAMP

Category Browser
T-TRACK
Check: HARDWARE for T-TRACK / MITRE TRACK / FIXTURE
New T-tracks with countersink holes are a virtual necessity on many woodworking machines, but not all are made with them included. These tracks accept standard M6, 1/4” , 5/16", M8 bolts and nuts. They measure 1/2” tall by 36” or 48" long. . Mount holes match the included screws and they can either be mounted between plywood or rest in dados. Stabilize your working actions on table saws, band saws, router tables and much more. 
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
TTK5 24", 18.9 x 12.6 x 609mm (3-countersink hole) 300 $14.00 No
TTK6 36", 18.9 x 12.6 x 914mm (6-countersink hole) 500 $20.00 Yes
TTK7 48", 18.9 x 12.6 x 1219mm (7-countersink hole) 800 $28.00 Yes
T-TRACK HOLD DOWN CLAMP
Make your T-tracks more versatile with the use of a T-Track clamp. Just slide it into the track and tighten. Sized to fit standard track that accepts 5/16"(M8) and 1/4" (M6) hex head bolts,  2" capacity.
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
THDCM850 5/16"(M8 thread T-Bolt) 520 $15.00 Yes
THDC9441 2pc/set 1/4" thread T-Bolt 920 $30.00 Yes
UNIVERSAL FENCE CLAMP
With this adjustable clamp, you'll always have the correct size fence clamp available. Perfect for holding sacrificial fence boards for rabbeting. Simply drill a 3/8" hole in the top of the auxiliary fence and secure it with the clamps to your existing system. 
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
UFC1 2pcs/set, 3/8" Adjust bar 900 $45.00 Yes
CAM ACTION HOLD DOWN CLAMP
Improve your shop-made jigs & fixtures with this quick action cam clamp. Exerts up to 400 lbs of pressure.
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
HTD-02A 1/4" x 20 tpi 120 $10.00 Yes
HTD-02C 5/16" x 18 tpi 150 $10.00 Yes
FLIP STOP
Repetitive cuts are easy with this flip stop on your fence. Finger tighten knob allows quick adjustment while the flip away stop allows end trimming of longer piece prior to final cut to length. Requires a minimum fence height of 58mm.
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
TES5 1/4" BOLT FOR MINI T-TRACK 300 $22.00 Yes
FLIP STOP for T-TRACK
Fully adjustable solid aluminum stop on T-track allows repeatable accuracy. Aluminum stop for 1/4" mini T-track slot, Flips out of the way if you need to make an odd cut in the middle of the run. Easy to use - just slide onto your t-track, Set to desired measurement and make repetitive cuts without re-measuring each time.

ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
PST2 1/4" T-Bolt for Mini T-Track 400 $28.00 Yes
JIG & FIXTURE SET
Fits 3/4" T-miter slots only. Feather board is not included.
Expands to tighten in slot as knob is tightened.

ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
FSJ1 3/4" 150 $12.00 Yes
MINI T-TRACK
This aluminum extrusions 3/4" (18.9mm ) width x 3/8"(9.5mm) height Mini T-Track fits M6 or 1/4" T bolts or standard hexagonal head bolts (11mm ). 
The lengths are available in 2505mm are hard to post ( pick up only ).
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
MTTA-626 1/4" Slot, 18.9 x 9.5 x 626mm mini 300 $10.00 No
MTTA-835 1/4" Slot, 18.9 x 9.5 x 835mm mini 500 $16.00 Yes
MTTA-1252 1/4" Slot, 18.9 x 9.5 x 1252mm mini 800 $24.00 Yes
MITER T FANCE
The adjustable, extruded aluminum fence increases the face of your miter gauge to 2-5/16" (59mm) high x 22" (558mm) long. The built-in extension bar increases the stop capacity to 36" (914mm). The included nylon stop adjusts along the full length of the fence and locks tight for perfect repetitive cuts. ( Miter Gauge not included )
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
MTF-01 59 x 559mm, max 914mm long 1200 $68.00 Yes
MITRE GAUGE
This precision miter gauge improves the accuracy and safety when cross cutting or mitering. The slide bar has a locking washer that fits snugly into an aluminum track with a matching groove.  Of course you can remove the locking washer and use this with any standard 3/4" x 3/8" track.
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
MGC2 for 3/4" x 3/8" track 1800 $95.00 Yes
MITRE GAUGE
Build your own mitre gauge to cut however long you want  3/4" x 3/8" mini T-track and drilling a hole easily attaches to mitre gauge using 5.5mm pin. This versatile attachment allows 0-60° angle on both sides with locking knob.
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
MG80132 80 x 132mm 650 $20.00 Yes
MITRE TRACK
The aluminum 18.9mm wide slot extrusion is used for mitre gauge, mitre fence, featherboard, slide cam clamp, rolling wheel ,etc. 18.9mm T-Nut and 18.9mm x 9.5mm Bar. 
You can simply cut Mini T-track 18.9mm x 9.5mm to size, upside down fit in slot avoids the annoying galling.

The lengths are available in 2505mm are hard to post  ( pick up only ). 


ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
MTRA-835 18.9x9.5mm slot, 12.2x28.4x835mm 650 $21.00 Yes
MTRA-1252 18.9x9.5mm slot, 12.2x28.4x1252mm 950 $29.00 Yes
MITRE TRACK FIXTURE KIT
Fasten accessories like feather boards and circle guides to your miter gauge track. Includes 2 each of knob, bolt, washer and fastening block. Miter track not included.
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
TC01 3/4" 50 $12.00 Yes
SLICK PLATE
High Density sheets are perfect for jigs & fixtures. These nonstick, low friction, abrasion resistant surface sheets give extra smooth sliding action for jigs, fixtures, and fences. Sheets are easily machined with carbide tipped saw blades and router bits. Useful for table saw runners, router templates, or for hundreds of other projects around your shop.
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
SP-3 1/8"(3mm) x 4"(102mm) x 36"(915mm) 500 $12.00 Yes
SP-6 1/4"(6mm) x 4"(102mm) x 36"(915mm) 1000 $24.00 Yes
SP-12 1/2"(12.7mm) x 4"(102mm) x 36"(915mm) 2000 $48.00 Yes
SP-34 3/8"(9.5mm) x 3/4"(19mm) x 36"(915mm) 900 $14.00 Yes
SLIDE CAM CLAMP
It fits 3/4" miter channel , T-Nut size 19 x 21 x 9.5mm , Top with locking bolt can tight site in miter channel on workbench.  
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
TP05-19 With 3/4" x 3/8" T-Nut 300 $25.00 Yes
SQUARE NUT
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
SN1010M6 M6, 10x10x4.2mm Suit mini T-Track (pack4) 30 $4.00 Yes
SN1212M8 M8, 12x12x5.8mm Suit T-Track (pack4) 40 $5.00 Yes
T-BOLT / HEX. HEAD BOLT

Build Custom Jigs using T-Slot bolts fitted to slide in Aluminum T-Track or Milled T-Grooves. Also can use normal Hex . head sliding bolt (Set Screw full thread)  just file two sides to fit.

M6 and 1/4"-20 T-bolt/Hex-bolt for mini T-Track, M8 and 5/16"-18 T-bolt/Hex-bolt for T-Track, 


ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
HBM650 M6x50mm Hex. (pack10) 200 $8.00 Yes
HBM675 M6x75mm Hex. (pack10) 250 $10.00 Yes
TB1445 1/4"x45mm T-bolt (pack10) 200 $10.00 Yes
TB1460 1/4"x60mm T-bolt (pack10) 250 $11.00 Yes
TB1475 1/4"x75mm T-bolt (pack10) 300 $12.00 Yes
HB1440 1/4"x40mm Hex. (pack10) 160 $7.00 Yes
HB1450 1/4"x50mm Hex. (pack10) 200 $8.00 Yes
HB1475 1/4"x75mm Hex. (pack10) 300 $10.00 Yes
TB51625 5/16"x25mm T-Bolt (pack10) 200 $10.00 Yes
TB51638 5/16"x38mm T-Bolt (pack10) 150 $11.00 Yes
TB51665 5/16"x65mm T-Bolt (pack10) 250 $12.00 Yes
TB51688 5/16"x88mm T-Bolt (pack10) 350 $14.00 Yes
HB51663 5/16"x63mm Hex. (pack10) 250 $11.00 Yes
HB51685 5/16"x85mm Hex. (pack10) 350 $12.00 Yes
HBM850 M8x50mm Hex. (pack10) 200 $8.00 Yes
HBM875 M8x75mm Hex. (pack10) 300 $10.00 Yes
T-TRACK CLAMP
Create special jigs, positioners and hold-downs to suit your work and save hours of set-up time! Double side use hold-down clamp plus a knob and 1/4"-20 (M6) or 5/16"-18 (M8) sliding bolt. Hold-downs work from 0" to 2-1/2" thick.

ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
CTKB-M6 20x132mm clamp+M6 bolt+knob, Suit mini T-Track 200 $10.00 Yes
CTKB-M8 20x132mm clamp+M8 bolt+knob, Suit T-Track 250 $10.00 Yes
CTKB-1/4 20x132mm clamp+1/4" bolt+knob, Suit Mini T-Track 200 $10.00 Yes
CTKB-5/16 20x132mm clamp+5/16" bolt+knob, Suit T-Track 250 $10.00 Yes
T-TRACK CLAMP
Secure work piece easily to any T-track equipped jig hold down clamping.  TTC-02P  2pc/set made by ABS. with M8x90mm sliding bolts and knobs ,       
HTD-01  Made by Aluminum with protection. 25x135mm heavy duty hold down with 1/4" -20 sliding bolt and knob.
HTD-02  Made by Aluminum with protection. 25x135mm heavy duty hold down with 5/16" -18 sliding bolt and knob.,
ITEM NO. DESCRIPTION WEIGHT(g) PRICE QUANTITY IN STOCK ORDER NOW
TTC-02P 2pc/set 8.5x22x135mm with M8x90mm bolt & knob (ABS.) 190 $10.00 Yes
HTD-01 1pc 7x25x135mm with 1/4"x80mm bolt & knob (Alum.) 150 $10.00 Yes
HTD-02 1pc 8.5x25x135mm with 5/16"x80mm bolt & knob (Alum.) 160 $10.00 Yes
454 HUME HWY. YAGOONA 2199 NSW TEL:(02)9709 8805 FAX:(02)9709 8831